![]() ISO 2330:2002 - Fork-lift trucks - Fork arms - Technical characteristics and testing.Standardizes the mounting dimensions between the fork hooks and carriages to make it easier to switch different forks ISO 2328 - Industrial trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions.The ISO’s forklift standards and requirements include: Sets design, dimensions, operation, testing, and maintenance requirements for forklift forks B56.11.4 - Hook-Type Forks And Fork Carriers For Powered Industrial Forklift Trucks.Sets general rules for both users and manufacturers of lift trucks, along with specifics on forklift forks B56.1-2012 - Safety Standard for Low Lift and High Lift Trucks.These help prevent the forks from sliding during travel and the possible loss of the loadĪNSI’s forklift fork standards and requirements include: Never operate a forklift that has a missing, inoperable, or removed positioning lock.Don’t use forks that show any defects such as surface cracks, bent shanks or blades, uneven tips, or excessive wear.Inspect forks during the pre-operation forklift inspection and remove forks that are not in good working order from service.Employers are responsible for ensuring forks are in good order before use - failure to do so may be a violation of the general duty clause.OSHA’s key forklift guidance and requirements include: OSHA, ANSI, and ISO provide the industry standards for forklift forks. You should also inspect for cracks, the locking hardware integrity, and for the presence and legibility of fork markings Inspecting forks should include measuring the blade wear, hook wear, straightness, angle, and tip level.Check forks before every use to ensure they're in compliance with OSHA, ANSI’s guidelines, and any other relevant safety standards. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |